LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Distribution Center >> Assembly >> Power Distribution Center Assembly >> Relay Wedge >> Installation

Relay Wedge: Installation

  1. From the top of the PDC housing, align and insert the PDC relay wedge latch arms into the correct cavities in the relay cassette.
  2. Gently and evenly press the PDC relay wedge down into the relay cassette until both of the latches are fully engaged.
  3. Install each of the removed relays into the proper cavities of the PDC relay wedge.
  4. Install the PDC housing lower cover.
scientia non olet · About LEMON Manuals