LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Liberty Limited, 4WD, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System & Remote Keyless Entry System >> Remote Keyless Entry Module >> Removal

Remote Keyless Entry Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the Junction Block (JB).
  3. Remove Remote Keyless Entry module from Body Control Module.
    Fig 1: Removing & Installing RKE Module
    G01744975Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals