Removal - 4.0L

The MAP sensor is mounted to the side of the throttle body (Fig 1 ). An L-shaped rubber fitting is used to connect the MAP sensor to throttle body (Fig 1 ).

Fig 1: 4.0L MAP Sensor Mounting

Courtesy of DAIMLERCHRYSLER CORP.

1. Remove air cleaner duct and air resonator box at throttle body.
2. Remove MAP sensor mounting bolt (screw) (Fig 1 ).
3. While removing MAP sensor, slide the rubber L-shaped fitting (Fig 1 ) from the throttle body.
4. Remove rubber L-shaped fitting from MAP sensor.