LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2004 >> Grand Cherokee Overland, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Coolant Level Sensor >> Installation

Coolant Level Sensor: Installation

NOTE: Make sure the coolant level sensor fully seats into the rubber grommet. Failure to do so may cause inaccurate coolant level readings and leaks.
  1. Position sensor into the coolant recovery pressure container (Fig 1 ).
  2. Connect the coolant level sensor electrical connector (Fig 2 ).
  3. Close hood.
    Fig 1: Coolant Level Sensor Electrical Connector
    G03577409Courtesy of DAIMLERCHRYSLER CORP.
    Fig 2: Coolant Level Sensor Removal/Installation
    G03577410Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals