Power Liftgate System: Liftgate: Removal

CAUTION: Do not disconnect the support rod cylinders with the liftgate closed. The support rod pistons are operated by high pressure gas. This pressure could cause damage and/or personal injury if they are removed while the pistons are compressed.

Open and support the liftgate.
Remove the trim panel. (Refer to TRIM PANEL )
Remove the prop rods from the liftgate.
Disconnect the wire harnesses and the washer hose.
Using a grease pencil or equivalent, mark the hinge location.
Remove the liftgate to hinge screws and remove liftgate from vehicle. (Fig 1 )

Fig 1: Removing Liftgate
Courtesy of DAIMLERCHRYSLER CORP.