Power Outlet: Installation
- Install the cigar lighter or power outlet mount into the instrument panel center lower bezel.
- Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the mount.
- Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.
- Install the cigar lighter knob and element or the protective cap into the cigar lighter receptacle base, or close the power outlet door in the instrument panel center lower bezel.
- Install the center lower bezel onto the instrument panel. Refer to INSTRUMENT PANEL CENTER BEZEL - LOWER for the procedure.
- Reconnect the battery negative cable.