Specification - Torque
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Balance Shaft Carrier to Block Bolts | 40 (54) | |||||||||||||||
| Balance Shaft Sprocket Bolt | 21 (28) | |||||||||||||||
| Camshaft Sprocket Bolt | 75 (101) | |||||||||||||||
| Connecting Rod Cap Bolts | 40 (54) | |||||||||||||||
| Crankshaft Damper | 100 (136) | |||||||||||||||
| Crankshaft Main Bearing Caps/Bedplate Bolts (1) | ||||||||||||||||
| Step 1 | Insert Wedge (2) | |||||||||||||||
| Step 2 Bolts 1-10 | 30 (41) | |||||||||||||||
| Step 3 | Remove Wedge | |||||||||||||||
| Step 4 Bolts 1-10 | 30 (41) | |||||||||||||||
| Step 5 | Additional 90 Degrees | |||||||||||||||
| Step 6 Bolts 11-20 | 21 (28) | |||||||||||||||
| Step 7 | Verify Turning Torque (3) | |||||||||||||||
| Cylinder Head Bolts (4) | ||||||||||||||||
| Step 1 | 25 (34) | |||||||||||||||
| Step 2 | 50 (68) | |||||||||||||||
| Step 3 (Repeat of Step 2) | 50 (68) | |||||||||||||||
| Step 4 | Additional 90 Degrees | |||||||||||||||
| Engine Mount Bracket Right (Front) Bolts | 45 (61) | |||||||||||||||
| Engine Mount Bracket Left (Rear) Bolts | N/A | |||||||||||||||
| Exhaust Manifold to Cylinder Head Bolts | 17 (23) | |||||||||||||||
| Flex Plate to Crankshaft Bolts | 70 (95) | |||||||||||||||
| Flywheel Mounting Bolts | 60 (81) | |||||||||||||||
| Intake Manifold Lower Bolts (5) | 21 (28) | |||||||||||||||
| Oil Filter | 15 (20) | |||||||||||||||
| Oil Pan Drain Plug | 20 (27) | |||||||||||||||
| Oil Pump to Block Bolts | 21 (28) | |||||||||||||||
| Oil Pump Pick-Up Tube Bolt | 20 (28) | |||||||||||||||
| Oil Pump Relief Valve Cap | 30 (41) | |||||||||||||||
| Spark Plugs | 15 (20) Max. | |||||||||||||||
| Timing Belt Tensioner Assembly Bolts | 45 (61) | |||||||||||||||
| INCH Lbs. (N.m) | ||||||||||||||||
| Balance Shaft Gear Cover Double Ended Fastener | 105 (12) | |||||||||||||||
| Balance Shaft Chain Tensioner Bolts | 105 (12) | |||||||||||||||
| Balance Shaft Carrier Cover Bolts | 105 (12) | |||||||||||||||
| Camshaft Bearing Cap Bolts (6) | ||||||||||||||||
| M6 | 105 (12) | |||||||||||||||
| M8 | 250 (28) | |||||||||||||||
| Cylinder Head Cover Bolts (7) | ||||||||||||||||
| Step 1 | 40 (5) | |||||||||||||||
| Step 2 | 80 (9) | |||||||||||||||
| Step 3 | 105 (12) | |||||||||||||||
| Exhaust Manifold Heat Shield Bolts | 105 (12) | |||||||||||||||
| Oil Pan Bolts | 105 (12) | |||||||||||||||
| Oil Pump Cover Plate Bolts | 105 (12) | |||||||||||||||
| Timing Belt Covers | ||||||||||||||||
| Front to Rear | 105 (12) | |||||||||||||||
| Rear | 105 (12) | |||||||||||||||
|
||||||||||||||||