Lower Control Arm: Installation

NOTE: Small holes in the side of the arm face inboard.

Position the lower suspension arm in the axle bracket and frame rail bracket.
Install the rear bolt, and finger tighten the nut.
Install bolt/cam bolt and new nut finger tighten in the axle and align the reference marks.
If equipped with ABS brakes install sensor wire to the inboard side of the arm with new clips.
Lower the vehicle.
Tighten axle bracket nut to specification. See TORQUE SPECIFICATIONS .
Tighten frame bracket nut to specification. See TORQUE SPECIFICATIONS .
Align vehicle to specifications. See ADJUSTMENTS .