LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Controls - System & Component Testing) >> Fuel Systems >> Fuel Control >> Fuel Injectors

Fuel Injectors

WARNING: This page is about a different car, the 2003 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect fuel injector from wiring harness. Connect ohmmeter between fuel injector terminals. Resistance should be about 10.8-13.2 ohms at 68°F (20°C). If resistance is not as specified, replace fuel injector.

scientia non olet · About LEMON Manuals