LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Distribution Center Support Bracket >> Removal

Power Distribution Center Support Bracket: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the Power Distribution Center (PDC) from the PDC bracket (Refer to REMOVAL ).
  3. Remove the three screws that secure the PDC bracket to the right front inner fender (Figure).
  4. Remove the PDC bracket from the right front inner fender.
scientia non olet · About LEMON Manuals