LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Door System >> Latch >> Removal

Door System: Latch: Removal

  1. Remove trim panel. (Refer to TRIM PANEL - REMOVAL  ).
  2. Roll window to full upward position.
  3. Disconnect the lock cylinder to latch rod. (Fig 1 ).
    Fig 1: Removing Door Latch Assembly
    G02712337Courtesy of DAIMLERCHRYSLER CORP.
  4. Disconnect the lock knob to latch rod.
  5. Disconnect the outside handle to latch release rod.
  6. Remove the screws attaching the latch to the door.
  7. Lower the latch in the door and disconnect the inside handle to latch rod.
  8. Remove the latch from the door.
scientia non olet · About LEMON Manuals