LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Liberty Renegade, RWD, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Tray >> Installation

Battery Tray: Installation

  1. Clean and inspect the battery tray. (Refer to CLEANING  ).
  2. Position the battery tray onto the weld studs on the front extension of the left front wheelhouse inner panel.
  3. Install the battery temperature sensor onto the battery tray. (Refer to INSTALLATION  ).
  4. Install and tighten the three nuts that secure the battery tray to the weld studs on the front extension of the left front wheelhouse inner panel. Tighten the nuts to 7 N.m (65 in. lbs.).
  5. Install the PDC on the battery tray.
  6. Install the battery onto the battery tray. (Refer to INSTALLATION  ).
scientia non olet · About LEMON Manuals