LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Liberty Renegade, RWD, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Components >> Front Wheel Speed Sensor >> Installation

Front Wheel Speed Sensor: Installation

  1. Install the wheel speed sensor to the vehicle.
  2. Install the wheel speed sensor wire thru the wheel well.
  3. Install the wheel speed sensor wire to the hub/bearing.
  4. Install the wheel speed sensor wire hold down to the knuckle.
  5. Install the wheel speed sensor mounting bolt to the hub. Tighten the mounting bolt to 13.5 N.m (120 in. lbs.).
  6. Install the disc brake rotor. See FRONT BRAKE ROTOR in DISC article.
  7. Install the disc brake caliper adapter. See FRONT BRAKE CALIPER & BRAKE PADS in DISC article.
  8. Install the tire and wheel assembly.
  9. Reconnect the front wheel speed sensor wire connector to the inboard side of the wheel house being worked on.
scientia non olet · About LEMON Manuals