LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Liberty Limited, 4WD, Part Time, 42RLE >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Tray >> Removal

Battery Tray: Removal

  1. Remove the battery from the battery tray (Refer to REMOVAL  ).
  2. Unlatch and remove the PDC from the battery tray.
  3. Remove the battery temperature sensor from the battery tray (Refer to REMOVAL  ).
  4. Remove the three nuts that secure the battery tray to the weld studs on the front extension of the left front wheelhouse inner panel (Figure ).
  5. Remove the battery tray from the vehicle.
scientia non olet · About LEMON Manuals