LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Liberty Limited, 4WD, Part Time, 42RLE >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules >> Controller Anti-Lock Brake >> Removal

Controller Anti-Lock Brake: Removal

  1. Remove the negative battery cable from the battery.
  2. Pull up on the CAB harness connector release (Fig 1 ) and remove connector.
    Fig 1: Locating ABS Module And Electrical Connector
    G02706046Courtesy of DAIMLERCHRYSLER CORP.
  3. Remove the pump connector from the CAB.
  4. Remove the CAB mounting bolts (Fig 2 ).
    Fig 2: Removing HCU/CAB Mounting Bolts
    G02706047Courtesy of DAIMLERCHRYSLER CORP.
  5. Remove the CAB from the HCU (Fig 3 ).
    Fig 3: Removing/Installing CAB At HCU
    G02706048Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals