LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> Steering >> Power Steering Gear >> Rack Piston/Valve Assembly >> Installation

Rack Piston/Valve Assembly: Installation

  1. Lubricate new O-ring and teflon rings with power steering fluid and install on the rack piston/valve assembly.
  2. Lubricate the rack piston/valve assembly with power steering fluid.
  3. Slide the assembly into the gear housing.
  4. Install new stub shaft housing O-rings and install the housing. Tighten the housing bolts to 62 N.m (46 ft. lbs.).
  5. Install new O-ring on the pitman shaft cover.
  6. Install the pitman shaft into the gear housing.
  7. Install the pitman shaft cover bolts and tighten to 62 N.m (46 ft. lbs.).
  8. Perform over-center rotation torque adjustment (Refer to ADJUSTMENTS ).
  9. Install the steering gear (Refer to INSTALLATION ).
  10. Fill the power steering pump (Refer to PUMP ).
scientia non olet · About LEMON Manuals