LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee Overland >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Adjustable Pedal Assembly Systems >> Removal & Installation >> Adjustable Pedal Assembly >> Installation

Adjustable Pedal Assembly: Installation

  1. Install the pedals to the vehicle.
  2. Reposition the ICU and booster. Install the ICU mounting bracket nuts and bolts. Tighten to 21 ft. lbs. (28 N.m).
  3. Install the brake booster nuts. Tighten to 21 ft. lbs. (28 N.m).
  4. Install the pedal bracket upper nuts. Tighten to 9 ft. lbs. (12 N.m).
  5. Install the accelerator pedal nuts. Tighten to 21 ft. lbs. (28 N.m).
  6. Install the lower steering shaft coupler over the shaft.
  7. Install the lower steering shaft pinch bolt.
  8. Unlock the steering wheel.
  9. Reconnect the accelerator cable to the pedal.
  10. Reconnect the booster rod clip.
  11. Install the brake light switch.
  12. Reconnect the module electrical connector.
  13. Install the steering column opening cover.
  14. Install the cluster bezel.
  15. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals