LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2003 >> Grand Cherokee Laredo, 4.0 S, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Body Control Modules) >> Removal & Installation >> Sun Roof Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the glass panel to the fully closed position. Remove the "A" pillar trim. Remove the sun visors. Remove the overhead console. See OVERHEAD CONSOLE  .
  2. Lower headliner as necessary to gain access to the sunroof express module. Disconnect the express module wire harness connectors. Remove express module screw.
  3. Remove express module from the keyway by sliding module towards the center of the vehicle.
  4. To install, insert sunroof express module in the keyway located in the sunroof module and slide the module outward to lock it into position. Install the sunroof express module screw. Connect the wire connectors to the sunroof express module.
  5. Install the headliner into position. Install the overhead console. Install the sun visors. Install the "A" pillar trim. Test sunroof operation.
Fig 1: Locating Sun Roof Components
G00011651Courtesy of DAIMLERCHRYSLER CORP.