LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler X, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Clutch) >> Pilot Bearing >> Installation

Pilot Bearing: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Lubricate new bearing with Mopar high temperature bearing grease or equivalent.
  2. Start new bearing into crankshaft by hand. Then seat bearing with clutch alignment tool.
    Fig 1: Identifying Pilot Bearing Installer
    G01204754Courtesy of DAIMLERCHRYSLER CORP.
  3. Lightly scuff sand flywheel surface with 180 grit emery cloth. Then clean surface with wax and grease remover.
  4. Install clutch disc and pressure plate.
  5. Install the transmission.
scientia non olet · About LEMON Manuals