LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler Sport, Standard >> Repair and Diagnosis >> Steering >> Power Steering Gear >> Gear >> Installation

Power Steering Gear: Gear: Installation

  1. Install power steering hoses/tubes to steering gear and tighten to 28 N.m (21 ft. lbs.).
  2. Install steering gear on the frame rail and tighten bolts to 95 N.m (70 ft. lbs.)
  3. Align the Column coupler shaft to steering gear. Install a new  coupler pinch bolt and tighten to 49 N.m (36 ft. lbs.).
  4. Align and install the pitman arm and tighten nut to 251 N.m (185 ft. lbs.).
  5. Install power steering hoses/tubes to power steering pump.
  6. Fill power steering system to proper level. See PITMAN ARM in STEERING LINKAGE article.
scientia non olet · About LEMON Manuals