LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler SE, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System & Starting System >> Thermal Guard >> Installation

Thermal Guard: Installation

  1. Clean and inspect the battery thermal guard. Refer to Battery System CLEANING  for the proper cleaning procedures, and refer to Battery System INSPECTION  for the proper inspection procedures.
  2. Carefully and evenly slide the battery thermal guard down over the battery case.
  3. Install the battery and the battery thermal guard into the battery tray as a unit. Refer to INSTALLATION  for the proper battery installation procedures.
scientia non olet · About LEMON Manuals