Speedometer Drive Adapter: Removal
- Raise vehicle.
- Disconnect wires from vehicle speed sensor.
- Remove adapter clamp and screw.
Courtesy of DAIMLERCHRYSLER CORP.
- Remove speed sensor and speedometer adapter as an assembly.
- Remove speed sensor retaining screw and remove sensor from adapter.
- Remove speedometer pinion from adapter. Replace pinion if chipped, cracked, or worn.
- Inspect sensor and adapter O-rings. See Fig 1. Remove and discard O-rings if worn or damaged.
- Inspect terminal pins in speed sensor. Clean pins with Mopar® electrical spray cleaner if dirty or oxidized. Replace sensor if faulty, or if pins are loose, severely corroded, or damaged.