LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Steering >> Steering Linkage >> Steering System Linkage >> Tie Rod End >> Installation

Tie Rod End: Installation

  1. If necessary, install the tie rod ends in the tube. Position the tie rod clamp and tighten to 27 N.m (20 ft. lbs.).
    Fig 1: Installing Tie Rod
    G01205180Courtesy of DAIMLERCHRYSLER CORP.
  2. Install the tie rod on the drag link and steering knuckle.
  3. Tighten the ball stud nut on the steering knuckle to 47 N.m (35 ft. lbs.). Tighten the ball stud nut to drag link to 47 N.m (35 ft. lbs.) torque. Install new cotter pins.
scientia non olet · About LEMON Manuals