LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2002 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System & Starting System >> Starter Motor Relay >> Removal

Starter Motor Relay: Removal

  1. Disconnect and isolate battery negative cable.
  2. Unlatch and open cover on Power Distribution Center (PDC) (Figure ).
  3. See fuse and relay layout label affixed to underside of PDC cover for starter relay identification and location.
  4. Remove starter relay from PDC.
scientia non olet · About LEMON Manuals