Headlamps Fail To Flash With VTSS

Possible Causes:

• Incorrect Country Code Programmed In BCM
• Low Beam Headlamps Inoperative
• Body Control Module

Testing

1. Turn the Low Beam Headlamps on. Do the Low Beam Headlamps operate properly? If yes, go to next step. If no, see LOW BEAM HEADLAMPS INOPERATIVE  in the EXTERIOR LIGHTING. Perform VTSS VERIFICATION TEST  .
2. With the DRBIII(R) in Miscellaneous, check the Body Control Module country code setting. Is the country code correct? If yes, replace the Body Control Module. See BODY CONTROL MODULE (BCM)  in REMOVAL & INSTALLATION. Perform BODY VERIFICATION TEST  . If no, program the correct country code setting. Perform VTSS VERIFICATION TEST  .