LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2001 >> Grand Cherokee Laredo, 4.0 S, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Power Windows >> Driver's Rear Window Inoperative From Rear Switch

Driver's Rear Window Inoperative From Rear Switch

NOTE: Ensure window lockout switch on DDM (driver's front door switch) is operating properly before proceeding.

Remove driver's rear door trim panel. Disconnect driver's rear power window switch connector. Using DVOM, measure resistance between ground and driver's rear power window switch connector terminal No. 6 (Black wire). See Figure . If resistance is less than 5 ohms, replace driver's rear power window switch. If resistance is 5 ohms or greater, repair open in Black wire. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.