LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2001 >> Cherokee SE, 2D Utility, RWD, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Power Steering System) >> Pulley >> Removal

Section 2 (Power Steering System): Pulley: Removal

WARNING: This page is about a different car, the 2002 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: On vehicles equipped with the 4.0L, Do not reuse the old power steering pump pulley it is not intended for reuse. A new pulley must be installed if removed.
  1. Remove pump assembly.
  2. Remove pulley from pump with Puller C-4333 or equivalent puller.
    Fig 1: Removing Pulley
    G01205191Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals