LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2001 >> Cherokee Classic, 4WD, Part Time >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> On-Vehicle Testing >> Clutch Pedal Position Switch

Clutch Pedal Position Switch

WARNING: Vehicles are equipped with air bag supplemental restraint system. Before attempting ANY repairs involving steering column, instrument panel or related components, see SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM in appropriate AIR BAG RESTRAINT SYSTEMS article.
  1. Disconnect negative battery cable. Disconnect Clutch Pedal Position (CPP) switch connector, located under instrument panel. CPP switch is located on clutch pedal push rod (Cherokee) or in clutch master cylinder (Wrangler). Using DVOM, check for continuity between CPP switch connector (component side) with clutch pedal released. If continuity does not exist, go to next step. If continuity exists, replace faulty CPP switch.
  2. Depress clutch pedal. Check for continuity between CPP switch connector (component side). If continuity does not exist, replace faulty CPP switch. If continuity exists, CPP switch is okay. Check ignition switch. See IGNITION SWITCH TEST .
scientia non olet · About LEMON Manuals