LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> Removal & Installation >> Instrument Cluster >> Removal & Installation

Removal & Installation

  1. Disconnect negative battery cable. Set tilt steering column (if equipped) to fully raised position. Remove steering column cover from bottom of instrument panel. Using a trim stick, carefully pry instrument top cover away from instrument panel.
  2. Lift and remove instrument top panel from instrument panel. Remove 2 lower screws securing instrument cluster bezel to instrument panel. Remove 3 upper screws securing instrument cluster bezel to top of instrument panel and remove bezel.
  3. Remove 4 screws securing instrument cluster to instrument panel. Pull cluster rearward and disconnect 2 instrument cluster wire connectors. Remove instrument cluster. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals