LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Grand Cherokee Laredo, 4.0 S, AWD >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Modules >> System Tests >> Interior Lighting >> Driver's Door Courtesy Light Inoperative

Driver's Door Courtesy Light Inoperative

  1. Remove and inspect driver's door courtesy light bulb. Replace as needed. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS. If bulb is okay, go to next step.
  2. Remove driver's door trim panel. Disconnect Driver's Door Module (DDM) connector C2. See Figure. Using DVOM, measure resistance of Pink/Dark Green wire between DDM connector C2 terminal No. 9 and driver's door courtesy light bulb socket. See Figure. If resistance is less than 5 ohms, go to next step. If resistance is 5 ohms or greater, repair open in Pink/Dark Green wire. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  3. Using DVOM, measure resistance of Black/Red wire between DDM connector C2 terminal No. 12 and driver's door courtesy light bulb socket. If resistance is less than 5 ohms, go to next step. If resistance is 5 ohms or greater, repair open in Black/Red wire. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
  4. Replace DDM. See POWER WINDOWS - GRAND CHEROKEE article. Perform BODY VERIFICATION TEST  under VERIFICATION TESTS.
scientia non olet · About LEMON Manuals