LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2000 >> Cherokee Classic, 2D Pickup >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Power Door Locks & Keyless Entry System >> Programming >> Programming RKE Transmitter

Programming RKE Transmitter

NOTE: For more information, see TSB REMOTE KEYLESS ENTRY (RKE) PROGRAMMING PROCEDURES .

A maximum of 2 Remote Keyless Entry (RKE) transmitters can be recognized by RKE receiver. A scan tool and a functioning transmitter are required to program RKE module. Using scan tool, select THEFT ALARM, MISCELLANEOUS then PROGRAMMING RKE. Select a position (1-4). Locks will cycle to indicate vehicle is in program mode. Press UNLOCK button on transmitter. Locks will cycle again to indicate programming has occurred. Program second transmitter.

scientia non olet · About LEMON Manuals