LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1999 >> Wrangler Sport, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer - Tests >> Verification Test: VER-2A >> Body Verification Test

Body Verification Test

  1. Reconnect all previously disconnected components and connectors. If BCM was replaced, turn ignition on for at least 15 seconds.
  2. Ensure ignition is on. Erase all DTCs using scan tool. Turn ignition off and wait 5 seconds. Turn ignition on and fully operate system that was malfunctioning.
  3. If system is not operating properly, go to SYMPTOM ID TEST  . Using scan tool, read Body DTCs. If any DTCs are present, go to SYMPTOM ID TEST  . If no DTCs are present, system is operating correctly and customer's complaint cannot be duplicated, repair is complete.
scientia non olet · About LEMON Manuals