LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1999 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Fuel System >> Throttle Position (TP) Sensor >> Cherokee & Wrangler

Cherokee & Wrangler

Output voltage (center terminal of TP sensor) should be more than .26 volt, but less than .95 volt at closed throttle (idle) and less than 4.49 volts at WOT. Voltage should increase gradually and smoothly as throttle is slowly opened from idle to WOT. TP sensor is not adjustable.

scientia non olet · About LEMON Manuals