LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1999 >> Wrangler SE, Automatic >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer - Tests >> Instrument Cluster Symptom Tests >> Any Or All CCD Cluster Warning Lights Not Operating

Any Or All CCD Cluster Warning Lights Not Operating

  1. Turn ignition on. Using scan tool, select MIC CLUSTER. If scan tool displays BUS OPERATIONAL, go to next step. If scan tool displays any other message, see appropriate VEHICLE COMMUNICATIONS article. If scan tool displays NO RESPONSE , see appropriate VEHICLE COMMUNICATIONS article.
  2. Ensure ignition is off. Push and hold trip odometer reset button. Turn ignition on. Release button. Instrument cluster should enter self-test and actuate all CCD controlled indicator lights. If any indicator light did not illuminate, go to next step. If all indicator lights illuminate, system is functioning correctly.
  3. Remove instrument cluster and inspect suspected indicator light bulb. Replace bulb(s) as needed. If bulb(s) is okay, replace instrument cluster.
scientia non olet · About LEMON Manuals