LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1999 >> Cherokee Classic, 2.5 P >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> System Tests >> Turn Signal Indicator Lamp Test

Turn Signal Indicator Lamp Test

  1. Disconnect negative battery cable. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Connect negative battery cable. Actuate hazard warning switch.
  2. Check for battery voltage at instrument cluster 10-pin connector terminals No. 6 (Tan wire) and No. 10 (Light Green/White wire). There should be a switching battery voltage signal. If battery voltage does not exist, repair open circuit to turn signal switch. If battery voltage exists, replace faulty bulb(s).
scientia non olet · About LEMON Manuals