Power Window Switch Test
WARNING: This page is about a different car, the 1996 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Remove switch from door trim panel. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Disconnect switch from chassis wiring. Check switch continuity as specified in appropriate POWER WINDOW SWITCH CONTINUITY table. If switch tests as specified, go to MOTOR TEST . If switch fails any continuity check, replace faulty switch. See Fig 1 .
REAR POWER WINDOW SWITCH
| Switch Position | Check Continuity Between Pins No. |
|---|---|
| All Positions | 3 & 6 |
| Off | 1 & 2; 4 & 5 |
| Forward | 1 & 2; 5 & 6 |
| Rearward | 2 & 6; 4 & 5 |