LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1997 >> Wrangler Sahara, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 4.0L >> Self-Diagnostic System >> Retrieving DTCS >> Using Digital Odometer (If Equipped)

Using Digital Odometer (If Equipped)

  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Without starting engine, turn ignition on, off, on, off and on within 5 seconds.
  2. After a short pause, odometer reading is replaced by a 2-digit DTC. If more than one DTC is stored, after first DTC is displayed, there will be a short pause and then another stored DTC will be displayed.
  3. DTC 55 will always be last DTC displayed. After DTC 55 is displayed, odometer returns to normal mode. Once all DTCs are recorded, retrieve DTCs using scan tool to ensure all DTCs are obtained. See USING SCAN TOOL.
scientia non olet · About LEMON Manuals