Power Seat Switch Test
Remove power seat switch. See POWER SEAT SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check for continuity between switch terminals. See POWER SEAT SWITCH CONTINUITY . See Fig 1 . Continuity should exist between terminals being checked. Replace switch as necessary. If switch is okay, see POWER SEAT ADJUSTER/MOTORS TEST .
POWER SEAT SWITCH CONTINUITY - DRIVER'S
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Off | 1 & 2; 1 & 3 | |
| Off | 1 & 4; 1 & 6 | |
| Off | 1 & 7; 1 & 8 | |
| Off | 1 & 9; 1 & 10 | |
| Front Riser | ||
| Up | 1 & 10; 5 & 7 | |
| Down | 1 & 7; 5 & 10 | |
| Rear Riser | ||
| Up | 1 & 9; 5 & 8 | |
| Down | 1 & 8; 5 & 9 | |
| Center Switch | ||
| Forward | 1 & 3; 5 & 6 | |
| Rearward | 1 & 6; 3 & 5 | |
| Recliner | ||
| Up | 1 & 4; 2 & 5 | |
| Down | 1 & 2; 4 & 5 | |
POWER SEAT SWITCH CONTINUITY - PASSENGER'S
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Off | 1 & 2; 1 & 3 | |
| Off | 1 & 4; 1 & 6 | |
| Off | 1 & 7; 1 & 8 | |
| Off | 1 & 9; 1 & 10 | |
| Front Riser | ||
| Up | 1 & 7; 5 & 10 | |
| Down | 1 & 10; 5 & 7 | |
| Rear Riser | ||
| Up | 1 & 8; 5 & 9 | |
| Down | 1 & 9; 5 & 8 | |
| Center Switch | ||
| Forward | 1 & 3; 5 & 6 | |
| Rearward | 1 & 6; 3 & 5 | |
| Recliner | ||
| Up | 1 & 4; 2 & 5 | |
| Down | 1 & 2; 4 & 5 | |