Speed (Cruise) Control Switch
Disconnect negative battery cable. Wait 2 minutes for air bag system capacitor to discharge. Remove both speed control switch assemblies from steering wheel and disconnect connectors. Refer to SPEED (CRUISE) CONTROL SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check resistance at speed control switch terminals No. 1 and 2 (on both switches). See Fig 1. If continuity is not as specified in the SPEED CONTROL SWITCH RESISTANCE , replace defective speed control switch.
SPEED CONTROL SWITCH RESISTANCE
| Switch Position | Resistance (Ohms) | ||
|---|---|---|---|
| ON | 900 - 918 | ||
| SET | 6584 - 6716 | ||
| RESUME/ACCEL | 13860 - 16940 | ||
| CANCEL | (1) 0 | ||
| COAST | 2911 - 2969 | ||
|
|||