LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Orvis >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Testing >> Circuit Breaker Test

Circuit Breaker Test

  1. Test circuit breaker No. 3, located in junction block. Pull circuit breaker out slightly, making sure terminals still make contact with mating connector cavities.
  2. Using a voltmeter, check for battery voltage at Power Distribution Center (PDC) side of circuit breaker, Yellow/Red wire. If battery voltage does not exist, repair open to PDC. If battery voltage exists, go to next step.
  3. Check for battery voltage at power seat switch side of circuit breaker (Red wire). If battery voltage does not exist, replace faulty circuit breaker.