Power Mirror Switch
Remove the power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Place mirror select switch in left or right mirror mode. Check for continuity at appropriate terminals when each control button is depressed. See POWER MIRROR SWITCH CONTINUITY TEST . See Fig 1 . If continuity is not as specified, replace power mirror switch.
POWER MIRROR SWITCH CONTINUITY TEST
| Control Button | Pin Continuity |
|---|---|
| Up | "H" & "G" |
| Down | "G" & "H" |
| Right | "G" & "A" |
| Left | "A" & "G" |