LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Cherokee Classic, Part Time, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Component Tests >> Buzzer Module

Buzzer Module

NOTE: With the ignition in run, measure between the following pins and vehicle ground.
  1. Measure voltage at buzzer module connector terminal No. 1. See Figure . Meter should read battery voltage. If not, repair circuit to fuse No. 17 in fuse block module.

    Turn ignition switch off and remove the key from the ignition.

  2. Measure voltage at buzzer module connector terminal No. 7. Meter should read battery voltage. If not, repair open to fuse No. 15.
  3. Check for continuity between cavity for buzzer terminal No. 4 and a good ground. There should be continuity. If OK, go to diagnosis for the switch that is related to buzzer malfunction. If not OK, repair circuit to ground as required.
scientia non olet · About LEMON Manuals