Fluid Capacity

NOTE: Transmission fluid capacities are approximate. Always determine fluid level by reading on dipstick, rather than amount of fluid added. See TRANSMISSION REFILL CAPACITIES table.

TRANSMISSION REFILL CAPACITIES ⁽¹⁾

Application

Refill - Qts. (L)

Dry Fill - Qts. (L)

Cherokee

AW-4

⁽²⁾ 2.0 (1.9)

⁽³⁾ 8.5 (8.0)

30RH

⁽⁴⁾ 1.5 (1.4)

⁽³⁾ 8.6 (8.1)

Grand Cherokee

42RE/44RE

⁽⁴⁾ 1.5 (1.4)

⁽³⁾ 8.5-11.0 (8.0-10.4)

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Add this amount of fluid. Start engine and allow it to reach normal operating temperature. With engine idling and brakes applied, shift transmission through all gears, ending in Park. Add additional fluid to bring up to FULL mark on dipstick.

⁽³⁾	Quantity may vary by type of oil cooler and oil cooler lines.

⁽⁴⁾

Add this amount of fluid. Start engine and allow it to idle for at least one minute. With brakes applied, shift transmission through all gears, ending in Neutral. Add additional fluid to bring up to MIN mark on dipstick. Recheck fluid level with transmission at normal operating temperature. Adjust fluid level to MAX arrow mark on dipstick.

TRANSFER CASE REFILL CAPACITIES

Application	Pts. (L)
NV 231	2.2 (1.0)
NV 242	3.0 (1.4)
NV 249	2.5 (1.1)