LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Wrangler S, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator >> On-Vehicle Testing >> Test VER-1 - Verification Test VER-1

Test VER-1 - Verification Test VER-1

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any Tech Service Bulletins (TSBs) apply to vehicle and return to TEST TC-1A, if necessary.
  3. If engine starts and Powertrain Control Module (PCM) was changed, repair is complete.
  4. If engine starts and PCM was not changed, connect DRB to data link connector and erase trouble code messages. Repair is complete.
scientia non olet · About LEMON Manuals