LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Grand Cherokee Limited, 5.2 Y, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 5.2L >> Verification Tests >> Test VER-1 - No Start Verification Procedure

Test VER-1 - No Start Verification Procedure

  1. Inspect vehicle to ensure all engine components are connected. Reassemble and reconnect components as necessary. Inspect engine oil for fuel contamination. Change oil and filter if necessary. Attempt to start engine.
  2. If engine does not start, check if any Technical Service Bulletins (TSBs) apply to vehicle and return to TEST TC-1A  , if necessary. If engine starts and Powertrain Control Module (PCM) was changed, repair is complete. If engine starts and PCM was not changed, connect scan tool to PCM data link connector and erase trouble codes. Repair is complete.
scientia non olet · About LEMON Manuals