LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Cherokee Sport, 2D Utility, 4WD, Part Time, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System >> Lubrication >> Hydraulic System Bleeding

Hydraulic System Bleeding

  1. Fill reservoir. Operate engine until fluid reaches operating temperature of 170°F (77°C). Turn wheels to full left position. Check fluid, adding if necessary.
  2. Start engine, and operate it at fast idle. Recheck reservoir level. Add fluid if necessary. Turn wheels from side to side without contacting stops. Maintain fluid level just above pump body.
  3. After air is removed, return wheels to straight-ahead position. Run engine 2-3 minutes. Road test vehicle. Recheck fluid level.
scientia non olet · About LEMON Manuals