LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1995 >> Cherokee Country, 4WD, Part Time, Standard >> Repair and Diagnosis >> Electrical >> Starter >> On-Vehicle Testing >> Starter Relay Test

Starter Relay Test

  1. Remove starter relay from Power Distribution Center (PDC). Using an ohmmeter, check for continuity between terminals No. 30 and 87A. If no continuity exists, replace relay. See Fig 1 .
  2. Check resistance between terminals No. 85 and 86. If resistance is not 70-80 ohms, replace starter relay.
  3. Connect battery leads to terminals No. 85 and 86. Check for continuity between terminals No. 30 and 87. If no continuity exists, replace starter relay.
Fig 1: Identifying Starter Relay Terminals
G93C76101Courtesy of CHRYSLER CORP.
scientia non olet · About LEMON Manuals