Power Mirror Switch
Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Place selector switch in right or left mirror mode. Using ohmmeter, check for resistance at appropriate terminals when each of the operation switchs is activated. See Fig 1 and Fig 2 and see POWER MIRROR SWITCH CONTINUITY TEST . If continuity is not as specified, power mirror switch must be replaced as an assembly.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Pin Continuity | |
|---|---|---|
| Left Mirror | ||
| Up | A & F, E & G | |
| Down | A & G, E & F | |
| Right | B & F, E & G | |
| Left | B & G, E & F | |
| Right Mirror | ||
| Up | D & F, E & G | |
| Down | D & G, E & F | |
| Right | C & F, E & G | |
| Left | C & G, E & F | |