Fuel System Pressure Release
WARNING: This page is about a different car, the 1994 Dodge Ram Wagon, 1994 Dodge Ram Van, 1994 Dodge Pickup, 1994 Dodge Dakota, and 1994 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
ALWAYS relieve pressure before disconnecting any fuel injection-related components. DO NOT allow fuel to contact engine or electrical components.
Disconnect negative battery cable. Loosen fuel filler cap to release tank pressure. Remove protective cap from pressure test port on fuel rail. Using appropriate fuel pressure gauge/hose with gauge removed, place gauge end of hose into approved gasoline container. To release pressure, screw other end of hose onto pressure test port. After pressure is released, remove hose from test port and install protective cap.