LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1993 >> Wrangler Base, 4.0 S, Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Fuel Tank >> Removal & Installation (Wrangler)

Removal & Installation (Wrangler)

  1. Disconnect negative battery cable. Relieve fuel system pressure. See FUEL SYSTEM PRESSURE RELEASE  . Remove fuel tank filler cap, and siphon fuel out of fuel tank. Raise and support vehicle. Remove filler neck shroud. Disconnect filler vent hose and fuel filler hose from tank.
  2. Disconnect fuel gauge sending unit connector. Remove tie straps securing connector harness to fuel supply and return tubes. Disconnect fuel tank vent hose from vent tube.
  3. Remove fuel tank shield and skid plate as single assembly. Support fuel tank with floor jack, and remove support strap nuts. Lower fuel tank and remove. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals